1·The introduction of micro pressure sensor array expands ways detecting boundary layer separation point.
微型压力传感器阵列的引入，拓宽了边界层分离点检测的解决途径。
2·The rendezvous error between launch vehicle and target forecast is caused by separation point error of intercept.
运载器弹道与预测命中点之间的交会误差是拦截器分离点误差引起的。
3·Having the aid of position coordinate of reference separation point, the point can be moved to outlet of vane by changing coefficient of vane shape.
借助于分离参考点的位置坐标，通过改变叶片形状系数，能有效地使分离参考点移向叶片出口端。
4·Through analyzing the methods and combination of the low speed wind tunnel test data, the position of the separation point can be detected accurately.
通过对试验结果进行数据处理，验证了该判定方法对分离点位置判定的正确性和有效性。
5·The micro shear stress sensor which based on the smart skin for boundary-layer separation point detection of delta wing has been explored in this paper.
本文就以用于实现三角翼边界层分离点检测的面向灵巧蒙皮的微型剪应力传感器为对象展开研究。
6·The ball mill′s rotational speed can only affect the impact force and frequency and has no influence on its separation point between balls and mill wall.
高能球磨机的转速不会影响磨球与磨筒壁的脱离点，只会影响磨球对粉体的撞击力及撞击频率。
7·Micro-shear stress sensor plays an important role in detecting separation point of the boundary layer due to small-scale structures and the desired spatial and temporal resolution.
微型剪应力传感器以尺寸小、时空分辨率高的特点在边界层分离点测量中表现出了突出的优势。
8·The streamline behaviour near a separation point of two dimensional steady and unsteady viscous flow is studied, and a general criterion for flow separation is presented in this paper.
本文研究了定常、非定常二维粘性不可压缩流动在分离点附近的流线性状，给出了判定分离的通用判据。
9·This design proposal of micro pressure sensor array can effectively meeting the measuring requirement of boundary - layer separation point, and expand engineering applied scope of MEMS devices.
设计的微型压力传感器阵列可有效满足边界层分离点的检测要求，进一步拓展了MEMS器件的工程应用范围。
10·If the reference separation point approaches the outlet, the test results are satisfactory, which state that the practical position of boundary layer separation point will be close to the outlet.
若分离参考点接近于出口端，则可获得满意的测试结果，这说明边界层实际分离点的位置已经很接近于叶片的出口端。